EPS Sandwich Wall Panel
Colors
ASTRO® METALLIC LUSTRE EFFECT
COSMIC® METALLIC LUSTRE EFFECT
RHEA® METALLIC LUSTRE EFFECT
GALACTIC® METALLIC LUSTRE EFFECT
SHALE GREY®
EVENING HAZE®
SURFMIST®
WINDSPRAY®
WOODLAND GREY®
JASPER®^
Product Description
EPS = Good Heat Insulation
EPS Sandwich Wall Panel with EPS foam cores meet the strictest heat insulation requirements, while also complying with the required insulation properties and maintaining a good bearing capacity.
▲EPS insulation core
▲Sound Insulation
▲Vertical or horizontal installation
▲Standard lengths are from 2 m to 10 m (max. 12 m)
▲Thickness of insulation core 50, 75, 100, 125, 150, and 200 mm
Advantages
EPS (Polystyrene) Sandwich Panels are composed of 3 layers, the external and internal is two dyed Galvanized or Aluminum corrugated plates, and core Polystyrene (EPS) rigid foam. Due to the advantages as heat and sound insulation, high load capacity, EPS panels are applied as external walls and internal division walls, installed vertically or horizontally on single- or multi-span structure. The panels can be installed horizontally or vertically. The core is made of expanded polystyrene, which is produced by our own factory
For example, EPS sandwich wall panel of 50mm thickness can absorb the sound over 30 db/m2. Widely used in the steel structure factory building, activities room, roof, wall, air clean room ceiling and partition.
SPECIFICATIONS
Panel Thickness |
50mm-150mm |
Type of Base steel sheet |
Hot-dip galvanized, Al-Zn coated |
Core Material Density |
10-25[kg/m⊃3;] |
Type of sheet Coating |
PVDF, PE |
Thickness of steel sheet |
0.4-0.8mm |
Standard Length |
Less than 11.8m, as customzied |
Cover width |
950mm and 1150mm |
Thermal conductivity |
0.032 w/(m.k) |
Application
EPS Sandwich Wall Panel are applied as external walls and internal division walls, installed vertically or horizontally on single- or multi-span structure buildings.
★Steel frame structure buildings
★Store houses and logistic centres
★Commercial buildings and offices
★Food industry facilities
★Agricultural objects
★Logistics centers
INSTALLATION VIDEO
1, First of all, it must carry on the construction preparation before installation, include personnel, materials, etc. All will be well prepared.
2, Before the installation of EPS sandwich wall panel, it should check whether the verticality and levelness of metope purlin installation requirements, wall frame column vertical degree meets the requirement.
3, It should first mounting plate bottom water retaining plate and the bottom of the window to block water board, water retaining plate and roof frame beam connection with self tapping screw fixation.
4, EPS sandwich wall panel links with ground.